Dometic GFA2303 Manuale Utente Scaricare il pdf (Pagina 16)

3.4 ON-OFF SWITCH

The on-off switch is delivered as standard in the cover of Travel Power

box. If another location of the on-off switch is requested please contact you

retailer for an extension cable.

3.4.1 Location of the on-off switch different from standard

When mounting the on-off switch in different place than standard, the

following instructions should be noted.

1. Extension cable (ordered separated) suiting the on-off switch containing

following parts must have been ordered:

- Extension cable, 10 m. Special length can be ordered.

- Plastic cover

- Explaining label

2. Remove the on-off switch from the Power box cover. This is done by

pressing the flange under the cover together and at the same time

pushing it through the cover (see the backside of the on-off switch in

Figure 9).

3. Attach the plastic cover to the Power box cover where the on-off switch

was located.

4. Remove the short cable connecting the Power box with the on-off

switch from the inlet on the Power box.

5. Attach the on-off switch at an easily accessible place, for example at

the dashboard. Choose the position so the LED does not irritate while

driving at night. The enclosed label, shown in Figure 8; can be tagged

close to the on-off switch.

6. Find a proper way to install the extension cable between the Power box

and the on-off switch. Do not fix the extension cable too tight and also

avoid sharp corners and hot places.

7. Connect the adapter on the extension cable to the on-off switch and the

other end to the inlet plug on the Power box.

The built-in measurements for the on-off switch are 21.08 mm x 36.83 mm,

the panel thickness is 0.75 to 2.5 mm.

1 2 ... 11 12 13 14 15 16 17 18 19 20 21 ... 26 27

Nessun commento

Dometic GFA2303 Manuale Utente Pagina 16